Poultry cooling machine _ spiral cooling machine manufacturers are chassis, drive motor, helical axis, a plate, fan and piping components. Work poultry body from the entrance into cooling machine, a screw blade body to promote the poultry at the outlet from the discharge plate and then pulls it, the fan is always work throughout the process, the wind from the bottom of the drum casing into the organ of the cooling liquid temperature uniformity, poultry skin and internal body tissues have been cleaning and cooling, colder ideal effect. Fourth, installation and adjustment 1, the device should be installed on a flat solid ground, the device should be adjusted each bolt in place, so that each leg hands uniform, smooth body, firmly. In the vicinity of the device should be pre-cooled water pools or flake ice machines, water and other facilities. 2, pulp and gear drive motor mounted in the appropriate position, adjust the position of the various components, to ensure that all back-axis parallel to the chain tension is moderate. 3, the fan with a tripod mounted on the wall, the fan should be significantly higher than the pre-cooling machine level position, the fan outlet pipe 89 fish cooling machine tubing connections, the connection should be sealed. 4, the drive motor and the fan motor and the power is turned on, jog way to start, observe the motor rotation is correct.